Deepak Arora...Evil CCIE# RS/SEC Passed SPv3... CCIE DC ? Bring It Own :-)
Passed My SPv3 Lab today at Hong Kong. The day didn't start up well but still it's the end that matters. The reason behind choosing SP is part of logical approach towards CCDE. But got to get CCIE DC...
View ArticleNaive question about portfast
I have a (very) naive question about PortfastShouldn't a portfast interface avoid sending STP BPDU ?In my memory : Access port + Classic STP : BPDUAccess port + Portfast STP : NO BPDUI have a portfast...
View Article7971GE will not boot at all
Hello guys,I've just started my Voice lab, but while upgrading the firmware on my 7971GE phone, I apparently messed up something.Now the phone shows a dark blue screen with nothing on it and I can see...
View Article6.30 OSPF NSSA Type-7 to Type-5 Translator Election
himy issue is there see topology ine workbook vol 1in sw3 SW3#show run | sec routerrouter ospf 1 router-id 150.1.9.9 log-adjacency-changes auto-cost reference-bandwidth 30000 area 2 nssa redistribute...
View ArticleCCIE SP Prep: is ATM still a relevant topic?
As I am studying and going through SP material, I find myself skipping over the ATM chapters on the books that I am reading. From a CCIE preparation point of view, do you think that this is ok? Is ATM...
View ArticleClik here to view.
LISP on CSR1000v and GNS3
After configuring LISP on the CSR1000v and watching it work, I decided to take some screen shots and share with you what I've done. Not only am I facinated by my new "baby" (the CSR1000v) and how I can...
View ArticleNew PfR vSeminar recordings
Hello all,has anyone heard anything about when the recordings for the new PfR vSemirar are going to be released to AAP members? This will sure be a great addition to the AAP catalogue =) Thanks
View ArticleAnyone actively preparing for CCDE?
I am surprised by how little activity there is on the CCDE section of this forum. I am booked for the August slot and interested to touch base with others preparing for the CCDE. Maybe a few group...
View Article3.2 Traffic Engineering PBR for vlan17-vlan56
So i finally thought I read this correctly...however my answer is not corresponding... :Configure the network in such a way that IPv6 traffic from VLAN 17 going to VLAN 56 is first sent to R4, and then...
View Articlezero counters
hi, can anyone provide sh intersface command which gives only zero counters,only zero counters havin incast/mcasts/etc all 0. ash
View ArticleBest and fastest way to learn a big ISP network
Hi I just started my new role in an ISP and I want to know the best / fastest way to learn the network.Can anyone share any of their experience when they first joined a company and what are your...
View ArticleIEWB RS vol1 v5 5.22 - EIGRP Filtering with Extended Access-Lists
HiThis is a problem related to DISTRIBUTE-LIST, whenever I use distribute list inbound or outbound, sometimes it works and sometimes doesn't. its very weirdin 5.22 lab task, I was trying to do this...
View ArticleIssue in EIGRP metric bases Route-Map in GNS3
Hello FriendsI have EIGRP initial configuration loaded on GNS3. Facing an issue while applying EIGRP route-map filtering on Sw3 to deny external route with composite metric 2226176.Below...
View ArticleLab 5.15 EIGRP Unequal Cost Load Balancing
Hi All, I can see the two paths to reach 155.1.9.9 via sw1 and R1 from R6 in the the topology table . But I cannot see the alternate path in routing table, even after changing the varience value to 128...
View Article5.21 EIGRP filtering with standard ACL (one line)
Hi all- just wanted to have someone else check behind me and point any flaws out in my reasoning. Task asks: "Configure a one line standard access-list on R6 to filter out all routes coming from BB1...
View ArticleAAA over console ports
Hi friends,I'll try to make it simple cause i want clarify a point that is confusing me since i dont find clear docs about that:I've 2 routers configured with AAA.Then have 2 lists configured to use...
View ArticleClik here to view.
MPLS for dummies
Good Morning all. Hopefully a very simple MPLS question, as I'm struggling a little to understand MPLS.I've set up this simple lab in GNS3, given each interface an ip, and given each router a loopback...
View ArticleChoosing (S,G) Or (*,G) on PIM-SM
Hi,İf there is both (S,G) and (*,G) entry on multicast routing table for one multicast group - source pair. Which entry will be choosen while forwarding multicast traffic on tihs router.Assume that,...
View ArticleNew CCNA here!
This is my first post here, but I just wanted to thank INE for great study material! I have been so busy with personal stuff (3yo and 6mo old Twins) that it was hard to find the time. However, I...
View Articlevpc peer-switch and separate layer 2 trunk for non vpc vlans
I have a question regarding the vpc peer-switch feature. I have configured peer-switch feature and has a separate layer 2 trunk for non vpc vlans between the the vpc peers. When i check the...
View Article