Legacy FRTS and MQC when BECNs are received
Hi please look that both configs are ok.- Adaptively shape down to 256Kbps if BECNs are received---map-class frame-relay DLCI_205 frame-relay cir 512000 frame-relay bc 25600 frame-relay be 0...
View ArticleWant to change the BB1-3 config
Hi, I want to change the BB1-3 config so I can use training materials from other vendors. Narbik...How can I load other config on the BB routers? When I enable I need a password. cisco doensn't work....
View ArticleLooking for study partner - online or not. GMT-3
Hello there!I came back from Seattle bootcamp a couple weeks ago and I now realize that a study partner would be great. After reading a few books on the CCIE road I thought this would be the best place...
View ArticleAS-Path prepend in IN direction
Hi,I have prepaired a toplogy where i want to control the traffic using AS-Path attribute. topology is uploaded and below is the link.i am trying to traffic engineer the traffic using AS-Path prepend...
View ArticleCisco SVI Sequence Configuration Generator
Hi. If you ever need to generate a large number of sequential SVI configuration, try this Python script.It can be easily tweaked for physical interfaces instead of SVIs....
View ArticleFull Reachability - SW3 ?
Hi, I was wondering how does the SG fulfils the requirements of having full readability as stated in the lab initial instructions ? SW3 is not running BGP, so how does it reach the BGP prefixes from...
View ArticleTask 2.3 BGP Features - alternative solution
Wouldn't the following be an alternative solution to aggregation component of this task on R2-router bgp 100 network 187.15.235.0 mask 255.255.255.0 aggregate-address 187.15.0.0 255.255.0.0...
View ArticleAdvertising labels for physical interfaces only?
Hi All I am bit confused,if I have four routers PE1 <--link1--> p1 <--link2--> p2 <--link3--> PE2 and I advertise labels for physical interfaces only. Can we have an issue is we are...
View ArticleVol 1 Task 9.24 MP-BGP for IPv6 using Link-local addresses fails
I tried configuring MP-BGP between R1 and R5 using the link-local addresses but the BGP does not come up. I don't understand why.I have frame-relay maps for the link-local addresses. I used the...
View ArticlePost:14 Hours To Go!, Now Renamed: I want my 14 Hours back ;-)
Thanks for the notes of encouragement and good luck gestures; but unfortunately it was not my day in the lab. It was a good experience over all, I have a lot to take away and improve on (not all...
View ArticleWhat is the benefit of LOOSE mode? (reachable-via ANY)
Every time that I get to this subject (spoof protection), I want to apply the STRICT mode of this command (unless asymetric traffic is specifically mentioned). ip verify unicast source...
View Article[XR] automatic redistribution from iBGP to eBGP (full lab 4)
hi, all: i'm in the middle of testing full lab 4 from INE and found something curious and i thought i'd ask. in this lab i have 3 ASBRs: R3 (ASN2000) and R5/XR1(ASN1000).according to the instructions...
View Article2.4 Community Tagging
I think the SG is mistaken in the way it has tagged the communities, or maybe I'm wrong? Task states the following: Prefixes tagged with community 100:542 should be advertised to BB1 with AS 100...
View ArticleClik here to view.
Site-2-Site VPN can only ping one way
Hello Everyone,I'm having a problem with site-to-site vpn using PIX & FORTINET 60B, If I ping from network behind PIX say "ping 172.21.1.102", it is SUCCESFUL but when I ping from network behind...
View ArticleCisco IP Communicator Blank Screen
We are running Cisco IP Communicator 7.0.6 on several PC's in the building. There is one PC in particular that works for every user account except for one, and it just started doing it. On this users...
View ArticleL3Vpn vs L2VPN to ine racks what am i going to miss??
hi,if i use l3vpn connection to the rack rentals, and chain my phones to the router.what am i going to miss, i means whats there in L2 VPN with 3550/3560 thats not avaiable in L3vpn with the switch?i...
View Articlel3vpn what am I going to miss?
hi,if i use l3vpn connection to the rack rentals, and chain my phones to the router.what am i going to miss, i means whats there in L2 VPN with 3550/3560 thats not avaiable in L3vpn with the switch?i...
View ArticleSummary-address not-advertise Filtering type5
Hi all,summary address not-advertise command shoul only filter out the type 7 lsa, but I can see it filtering the type 5. Here is my set up r2---Area0----r4------Area46------r6-----Connected I am...
View ArticleCalling and Called Party name
Normal 0 false false false EN-US X-NONE AR-SA MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0;...
View Article