Lab 5.15 EIGRP Unequal Cost Load Balancing

Hi All,

I can see the two paths to reach 155.1.9.9 via sw1 and R1 from R6 in the the topology table . But I cannot see the alternate path in routing table, even after changing the varience value to 128 on R6.

Please advice..

Rack1R6#sh ip eigrp 100 top 155.1.9.0/24
IP-EIGRP (AS 100): Topology entry for 155.1.9.0/24
  State is Passive, Query origin flag is 1, 1 Successor(s), FD is 30720
  Routing Descriptor Blocks:
  155.1.67.7 (Ethernet0/0.67), from 155.1.67.7, Send flag is 0x0
      Composite metric is (30720/5120), Route is Internal
      Vector metric:
        Minimum bandwidth is 10000 Kbit
        Total delay is 1200 microseconds
        Reliability is 255/255
        Load is 1/255
        Minimum MTU is 1500
        Hop count is 2
  155.1.146.1 (Ethernet0/0.146), from 155.1.146.1, Send flag is 0x0
      Composite metric is (45312/30976), Route is Internal
      Vector metric:
        Minimum bandwidth is 1544 Kbit
        Total delay is 1770 microseconds
        Reliability is 255/255
        Load is 1/255
        Minimum MTU is 1500
        Hop count is 4

router eigrp 100
 variance 128
 redistribute eigrp 10
 network 150.1.6.6 0.0.0.0
 network 155.1.67.6 0.0.0.0
 network 155.1.146.6 0.0.0.0
 metric weights 0 0 0 1 0 0
 no auto-summary

Rack1R6(config-router)#do sh ip route 155.1.9.9
Routing entry for 155.1.9.0/24
  Known via "eigrp 100", distance 90, metric 30720, type internal
  Redistributing via eigrp 100, eigrp 10
  Advertised by eigrp 10
  Last update from 155.1.67.7 on Ethernet0/0.67, 00:20:07 ago
  Routing Descriptor Blocks:
  * 155.1.67.7, from 155.1.67.7, 00:20:07 ago, via Ethernet0/0.67
      Route metric is 30720, traffic share count is 1
      Total delay is 1200 microseconds, minimum bandwidth is 10000 Kbit
      Reliability 255/255, minimum MTU 1500 bytes
      Loading 1/255, Hops 2