Automatic reply: An Honest Assessment
HI, I am on personal leave from 30th Aug to 10th Sept and would not have access to emails. If anything urgent please call me L3 Ops on-call on 97386131 or for other issues please contact Yew Lum for...
View ArticleTask 4.3 (OSPF)
This is really confusing... the question states:• Configure OSPF area 0 on the Frame Relay link between R3 and R4.• Do not change the default OSPF network type.• Do not use any network commands.•...
View ArticleDC Rack Issues
Well, I guess I'm glad I'm not the only person having massive problems with the datacenter racks. Admittedly, I'm a datacenter technologies novice. I had an extremely bad experience renting racks...
View ArticleTask 5.3 - ACLs forbidden by task
So I am not sure if this is the result of a recent edit, or has always been this way. I cannot find anyony else point it out, so i lean towards the former.Task 5.3 explicitly states, as the last bullet...
View ArticleBGP Send Community
hello,is there any reason we would want to use BGP Send Community in IPv4 unicast peerings? I know we need to send communities for VPN peerings (auto-added) and MDT peerings (not auto-added), but what...
View ArticleAutomatic reply: Task 5.3 - ACLs forbidden by task
HI, I am on personal leave from 30th Aug to 10th Sept and would not have access to emails. If anything urgent please call me L3 Ops on-call on 97386131 or for other issues please contact Yew Lum for...
View ArticleEbaling FCoE using the Admin VDC
Hi, recently, I was reading up abut the admin vdc in N7K, aswell as FCoE implementation with a storage VDC, and something struck me as a bit strange. If we read the FCoE config guide for Nexus7000,...
View ArticleClik here to view.
Failed 1st attempt
Friends,i just took the lab exam yesterday and i failed the 1st attempt. I am of course, furious. But with Cisco Systems. A bit of order.When i went to the bootcamp back in August in London i had just...
View ArticleLab 4 Task 4.1
I'm having a weird issue that i can't seem to put my finger on what's wrong. Everything is working except for XR2 advertising it's own loopback to R4:RP/0/5/CPU0:XR2#sh bgp vpnv4 uni neigh 10.0.0.4...
View ArticlePort fast query
Is there any difference in functionality when we implement port fast in global configuration mode V/S interface mode? -->>port fast at interface level:switch(config-if)#spanning-tree...
View ArticlePOS interface not letting Labeled traffic pass through
Guys anyone seen this before, where "POS interface is not letting Labeled traffic pass through". I am testing in INE Lab with 3.9.1 IOS-XR Version on Full Scale Lab 4 Basic setup is: * R3-XR1-XR2,...
View ArticleTicket 6
Hello,The task mention about redundant NAT btw R3 & R5, and R3 should be the primary translator, but I did not see redundant NAT config there.Any comment?
View ArticleCisco IOU for V5 Lab Preparation
So with my post i would try to have a better understanding about the benefits of using the IOU for the preparation of the new lab.And i would like to ask help out there if any of you guys is already...
View ArticleMPLS Path Selection
I am currently studying MPLS and had a question about path selection. Say R1 has two paths to destination X, via R2 or R3. R1 is peers with R2 and R3 and gets labels from both. How does R1 choose...
View ArticleAn Honest Assessment
Normal 0 false false false EN-GB X-NONE X-NONE I sat my second lab attempt on Tuesday the 3rd December and I did not pass. This hurt me emotionally as I had continued my constant study since my first...
View ArticleClik here to view.
SPAN in Nexus
Hello All,Please find the attached diagram.In N7K has SVI for VLAN 115 & 135 and N5Ks has L2 VLAN for 115 & 135. Requirement is to SPAN all the traffic leaving IN/OUT of both VLANS needs to...
View ArticleCalling party Transformation pattern issue
Hello All, I have 2 gateways one H323 GW (HQ) and one MGCP GW (BR1). For 911 calls, I made the calling party transformation pattern as "use Device pool calling party transformation pattern CSS" where I...
View Article2 part question. OSPF/certification support
First off can anyone give me some thoughts on why ospf would let a phone get dhcp from a server on another subnet but not permit the traffic needed for a phone to register on that same subnet as the...
View ArticleClik here to view.
Cisco CSR1000V and R&S v5
Hi,Does anyone has some idea if we can use Cisco CSR1000V for the new V5 blue print? I know it takes alot of resources from hardware point view. Just wanted to know if it does support all the listed...
View ArticleVoice LAB - RTP - Environment
Took my R&S in 2008 and passed, took my service provider in 2010 and failed. Both in RTP. I'm planning on taking my Voice lab this year sometime. What is the RTP environment like now for the Voice...
View Article