PPPoE with DHCP
Hi; I have a issue with DHCP on a PPPoE scenario, but because I did not know how to upload the picture on this forum, I asked my question here...
View ArticleTask 2.2 Redistribution. Alternate solution
So I accomplished the redistribution task in a slightly different way. My reasoning for this is that increasing the OSPF External AD above 170 when doing mutual redistribution with EIGRP, doesn't...
View ArticleClik here to view.
implementing Inter-Vlan Routing
hiI am trying to configure this Labfrom Host A, Host B, ALS1 , ALS2, I am able to ping only their gateways !on R1, I am able to ping all subnets (static route is enable to reach 200.200.200.0/24)on...
View Article4.15 not able to see
Dear Gents, After completing the 4.15 task I am unable to see the route of R3 Lo0 from R6 and also in R6 is not geetting update . Here is the Partial out put of R6: 150.1.0.0/24 is subnetted, 8...
View ArticleTask 2.2 - mutual redistribution - rip to ospf to eigrp
By changing the admin dinstance for ospf external routes to 171, R2 is no longer routing 192.10.1.0/24 (rip subnet between BB2 and R5) via OSPF area0 to R5, it is choosing the external EIGRP route...
View ArticleClik here to view.
Desk Phone Control missing on CUPS server
I don't know if I'm going crazy from all of the studying, or something corrupted, or I'm looking right at it and just can't find it. I can't seem to locate "Deskphone Control" on my CUPS server?? In...
View ArticleMdef cons get failed for VRF - Lab 4 - Task 6.1,2
Guys,I hit a possible bug on IOS-XR 3.9.1 (CSCti89409) while trying to configure MVPN for Full Scale Lab 4 Task 6.1-2I hit it on XR1 and XR2 both, but after removing the configuration, commit, and then...
View ArticleLabeled traffic using ISIS L1 Default Route?
Guys,Is it possible to have Labeled traffic using ISIS L1 Default Route (or any default route)? I guess the only way is to route-leak? I tried "mpls ip default-route" and it doesn't work. ! Network:...
View ArticleISIS over L2VPN Frame-Relay P2P
Guys,any idea why ISIS adj is not forming over L2VPN frame-relay P2P, but CLNS adj is forming?? Its seems like each CE isn't receiving LAN IIH packets from other end. Network:* R3 - (R1 - R2) - R4,...
View ArticleIssue with CUE intial configuration
Hi EveryoneI am using AIM CUE.During the initial configuration of CUE I am unable to add the NTP server address. Whenever I give the IP of the NTP server it gives an error cannot reach the NTP server,...
View ArticleIOS SCCP Registration Issue
Hi, I recently hit and issue where my dspfarm resources (MTP & transcoder) would not register and when I ran show sccp I got something along the lines of "TCP Socket down" in the output. I'm not...
View ArticleTask 2.2 Evil Router #5
So there I was moving right along through the lab and I hit problem 2.2. First part of it - no problem and I got down to the redistribution. I tagged routes coming in through RIP on R6 for the...
View ArticleLab Site Construction - Sydney
If you can't stand loud noises throughout the day and the occaisional construction worker passing through the office, best to avoid Sydney until the March 2014 timeframe. That being said, the proctor...
View ArticleSydney Lab Update
It's been a while since anyone posted anything in the Sydney branch, so I thought I'd post some points here about the Sydney environment in general. Will put something about my lab itself in another...
View ArticleHow to reset cisco 3560x switch password ?
Help! It's very unfortunately that I forget my cisco 3560x series WS-C3560X-24T-L switch password.I don't know how to solve this problem. Can someone tell me how to reset my password ? Is it same to...
View ArticleTask 4.8 EIGRP
Hello experts, wasn't the task suppose to specify that the EIGRP peering between R6 and BB1 use the password Cisco and mode MD5?
View ArticleOSPF study references
Why don't we gather each candidate's unique study reference, and share them among us? More efficient than self study. OSPF Areashttp://www.mav.kiev.ua/cisco/pix/lsa_diag.png OSPF Opening...
View ArticleVolume II Lab 17 Task 2.3
The first requirement states that AS 100 cannot be transit for AS 54 to reach AS 200 and vice versa without using access-list, prefix-list, and filter-list. So immediately I thought of setting...
View ArticleAutomatic reply: OSPF References
HI, I am on personal leave from 30th Aug to 10th Sept and would not have access to emails. If anything urgent please call me L3 Ops on-call on 97386131 or for other issues please contact Yew Lum for...
View ArticleSite 2 Site VPN
I have a configuration question I need to put a new ASA 5505 at a client's new DR site. They allocated an external ip address.What my client requires is two vpn tunnels form this site to their larger...
View Article