Clik here to view.
SecureCRT Users - The Magic Login Script for INE Racks is here!
Hello Friends,I've created a small python script to help me login on INE's racks, I am sharing it hoping you will find it useful. This is beerware, please pay me a beer if you find it useful, I won't...
View ArticleCCNP-DataCenter training?
Is there a CCNP-Data Center training on-line course available?
View Article9.9 issue
I am unable to create an ipv6 prefix-list on r5. Rack6R5(config)#ipv6 prefix-list ? sequence-number Include/exclude sequence numbers in NVGENRack6R5(config)#ipv6 prefix-list
View ArticleTask 3.2
Am I correct in assuming this task means that the interface will not show as being down on the sh int status command, but it will be down because the router will not respond to any other inarp requests...
View ArticleTCL Scripting
Does anyone have a good resource to learn basic "TCLing" for reachablity testing? I saw the post here: http://www.ine.com/resources/tclshrsh.htm, but I don't understand the code and it really doesn't...
View Article6PE over MPLS (LDPv4), next-hop question
Hi,In 6PE over MPLS, the next-hop of the IPv6 prefix will be changed to IPv4 of the loopback IP of PE, when exchanging routes via MP-iBGP with remote PE.Then may I know anyone know by what rationale...
View ArticleTCL Script help and advice
Dear All,I am tryiong to figure out how to write a TCL script to search for a particular string with a router's config (Ip helper address) and based on the interface on which the helper was found add a...
View ArticleEIGRP Tag
Hey, I am looking at an EIGRP implementation on the Nexus 7000 and I am wondering if the Internal Tag can be configured? I can see on Cisco's Documentation that the External Tag field can be set but on...
View ArticleStudy Approach
I read this article below about two manners to study to CCIE. On the Kick Start Approach he tells us to do the Appendix A after that do the Vol2 LAB1 and note the weak points to back to vol 1 and...
View ArticleR&S Topology Missing
Hello,I noticed I am no longer able to find the R&S Topology on INE's website:"How to build a CCIE rack". Has this been removed from the site? is the topology being changed?
View ArticleINE Staff: Request for feature on AAP
I have personally accustomed myself to watching videos on VLC media player (or any other player for that matter), but not at regular speed. Instead, I like to use 1.5X speed. This allows me to get...
View ArticleMQC Single-Rate Three-Color Policer
The solution guide explains how policing burst sizes at one end must be greater than shaping burst sizes at the other end, but the explanation is a little too difficult for me.Can someone...
View ArticleISIS packets and QoS in IOS-XR
I need to confirm a couple of points on ISIS, specifically running on ASR9000 with IOS-XR in an MPLS network.First am I correct that ISIS uses CLNS for its transport protocol on IOS-XR, same as IOS?And...
View ArticleLoading Configs
For those of you with a full home lab and using a 2511-RJ or equiv as an access server, how are you loading your lab configs to your routers and switches? One by one or some other method.I am running...
View Articlehost and route in routing table
I think I need a sanity check here or a least some help :0PIn the Vol 2 lab 2I'm seeing this on router 5 in the routing table: C 132.4.45.4/32 is directly connected, Serial0/1/0 C...
View Articlecucm cuc sip integration
Hi, Testing this integrationFollowed the cisco guide step by step.So in cucm: sip trunk, with sip profile configured as per guide. route pattern to vm pilot using the sip trunk. voice mail pilot...
View ArticleN5k to N2k
Little confsue ..suppose N2k is connected to Rack Mount server which has CNA 2nd Gen. topology is exhibited below-- Rack Server -- N2k (Cisco Nexus 2232PP) --- N5k -- MDS--Storage. NOW from CNA to...
View Articlects role-based enforcement
Hi, just trying to figure out cts role-based enforcement. My understanding is that this is a required global config command for any L2 ports which need SGACLs applied - e.g. server 1 on vlan 10 needs...
View ArticleWould you do this?(Root guard)
Would you apply root guard on a scenario where there are diiferent root bridges for each vlan?I think to apply root guard on such scenario would get totally confuse,i would prefer to apply root guard...
View ArticleWill this break TCP connection?
Hi guys,i have a question,observe this scenario below please where i have two connections with the ISP,each connection with its respective public ip address,Router's f0/1 public ip address is...
View Article