Who's from the Philippines?
Hey Gents,Just want to know who's from the Philippines here at IEOC? I am currently in the Philippines preparing for th lab exam on October, maybe you want to have a chat, talking about anything from...
View ArticleIt's got to be somthing simple.. Can't get VPN up to Voice Rack
Hello, I have an issue connecting to the voice racks, the setup is via the layer 2 vpn guide in the rack rental guide, I have pasted in everything to ensure I havn't missed anything and I am pulling my...
View Article[mpls vpn routing tables: should they be complete?]
hi, guys:i'm in full paranoid lab mode right now, obsessing over details that i'm not sure matter anymore...as far as i'm concerned, when doing mpls vpn, interAS vpn, CSC, etc...all these magic things...
View ArticleLab. 3 2.1
Have I missed something all my life.My solution for this was a simple frame-relay map ip... on R2 and R4, this meant they would use R5, to reach each other, and leave the network type alone.This was a...
View ArticleMonitor individual IPsec VPN tunnels on ASA
Let's say I have 5 IPsec Site-to-Site VPN tunnels configured on HQ ASA connected to 5 branch offices.Is there any Cisco or third party tools that can monitor each VPN tunnel and generate statistic data...
View ArticleTSHOOT Ticket 2 & 4
Hi guys,I found that after fixing the issue with this ticket (No2) ticket NO.4 with the multicast issue was resolved automatically.As after changing the network between SW1 and SW2 to area 1 and...
View Articleip prefix list
hi I need to study deeply that topic ip prefix-list in order to use it in ospf with the cde distribut-list prefix prefix nameI see that link http://blog.ine.com/2007/12/26/how-do-prefix-lists-work/and...
View ArticleIP Phone registration issue
Hi Guys, I always have an issue INE Rack 1 , all the will register except at branch 1 phone its getting IP from DCHP but not able to register with CCM,i have done clear cdp table ,shut and no shut the...
View Articlehow to connect external switch to dynamips
Hi, how to connect external switch to dynamips? I'm new to dynamips and trying to use it for ccie lap prep. following is my .net file: ############# Lab test############autostart =...
View ArticleUUID vs PWWN/NWWN
Hi all, Just confused by the purpose of UUID in UCS as we have got PWWN/NWWN to identify the components regardless of it's server or disks already.Any one has any idea ? ThanksJF
View ArticleCUE license issue
Hi all,i installed an AIM cue module in my lab and went to the configu inizialization process.I needed to upgrade from older version to 7.0.1. No problem usig freeftpd. The previuos version had only...
View ArticleDCI
hi,there are 3 DC's and we are in process of making them interconnect with dark fiber..we have 6500 and 7600 and would like to have nexus 7000 as core layer. can we 6500 and 7600 as core(7600) and...
View Article14.3 no pop label for 150.1.4.4/32 on R5 and R6 after applying the filter
HiAfter applying the access-list on R4 , R5 , R6 .. I can not see pop label for 150.1.4.4/32 on R5 and R6.Please advice Rack1R4#sh run | sec mplsmpls label protocol ldpmpls ldp neighbor 150.1.6.6...
View ArticleIPv6 link local
Imagine that we have two computers connected together by crossover cable or mybe connected by switch (lan network) .I want to use ipv6 addressing (link local addresses)after i gave every host static...
View ArticleBGP dampening - DOC-CD wrong?
Hi All,I was practicing BGP dampening with a route-map and noticed what looks like an error in the DOC-CD. I forgot to add a piece of config, namely the "set dampening 15 750 2000 60" command in the...
View Article1.1 allowed vlans
HiConsidering only 2nd bullet point. SG implements it on SW2, SW3 and SW4's trunk links for not allowing vlan 102. The same solution can also be implemented via either of the below two ways1. only...
View Articlewb-II lab 1 task 2.1 OSPF network types
I am reviewing/repeating labs -- and started experimenting with settings.My question is whether the network type really matters for ospf neighbor connections on the ethernet segment. Does it matter,...
View ArticleTask 2.1 Intercept OSPF communication
I don't understand this bullet in task 2.1. We are to ensure other OSPF devices running on the segment between R4 and R5 cannot intersecpt OSPF communications.The solution is to change the interface...
View Articleqos command syntax issues
Hi everyone; i was going through some of the configs on our service provider managed cpe device. policy-map CUSTOMER_POLICY_INclass class-defaultpolice cir <EF policing rate in bps>bc...
View ArticleWhat do interfaces have to agree on for port-channels?
Port-channel with fa0/13 and 14 shows only one member on each side as up. Why is this? What do interfaces have to agree on to be members of a port-channel? interface FastEthernet0/13 switchport trunk...
View Article