FSPF calcualtion and FC Portchannels
How does a FC portchannel effect the FSPF cost calculation? (if at all). would the cost be equal to all of links in the port channel? or will it be equal to all of the links in the port channel that...
View ArticleRS v5 Lab IOU?
So apparently it's all IOU based...Things I cant do on IOU:Any form of SPANUDLDI'll add to this if/when I find other things. But if I can't do this in IOU, I cant see how I would see it in the...
View ArticleMonitor Capture
Hi All, Can someone tell me what version of code the monitor capture that Brian uses on his videos is limited to? He uses the cmds below R1#monitor capture GRE match any interface gigabitEthernet1.13...
View Articlev5 Initial Config: Find/Replace String All Files (OS X)
The following command will change the interface type in the text files, or any other string in the files.I downloaded the folder and ran the following command from terminal to change all the interfaces...
View ArticleNHRP routes not apearing in DMVPN phase3
Hi all,I'm unable to get NHRP routes in routing table and the % for NHRP next-hop overide.IOS version used on real equipments: Cisco 2811 Version 15.1(4)M8, RELEASE SOFTWARE (fc2)HUB config:interface...
View ArticleVTP pruning question
[Edit]: I REALLY need to stop posting after my brain is fried from messing around in some labs..wrong subforum (sorry all!)Do the VLANs have to have ports configured in them to request not to be...
View Article[help] understanding fast rerouting in eigrp ?
i have been studying about fastrerouting for eigrp, but i have beens tuck on understanding some partsof it.when i tried to read the cisco document regarding this i couldn't able to catch the points....
View ArticleBuilding INE's RSv5 topology with physical switches
Use this thread for discussion on building INE's CCIE RSv5 topology using physical switches.Details of INE's RSv5 topology can be found here.Details on LAN Access Switches can be found here.This thread...
View ArticleTicket 7
Ticket 7• R2 cannot establish BGP session with SW2. Do not change the peering addresses to resolve the issue: I configured the neighbor x.x.x.x disable-connected-check but since there is an INBOUND...
View ArticleQuick question about SAN-A/SAN-B
Hey guys!! Quick question. When everybody says SAN-A/SAN-B or Fabric-A/Fabric-B separation that means, for example, server1 having it's HBA port1 on vsan10 and port2 on vsan20? Thanks!
View ArticleOSPF filtering with route-maps - anyone get it working filtering on...
I spent ages on this - tried to get it working using a route-map that matched routes advertised by R4 using the route-source in the route-map, but no joy whatsoever. Anyone else have any success using...
View ArticleGRE Tunneling
Hi In verification section of Gre Tunneling which is R1#monitor capture GRE match any interface gigabitEthernet1.13 bothThis command doesnt exist, Am I using worng IOS , though its same as recommended...
View ArticleINE WB timeline
Hey Brian/guys,just want to ask you about some timeline regarding the INE WB Vol I development and also about some other products (if they are available) simmilar to the previous version:INE WB Vol I -...
View ArticleDMVPN Phase 3
Hi, I have a doubt, I was practicing DMVPN Phase 3, MY quetion is that why "ip nhrp redirect" command is required in Spokes, without this command its working, but in cisco documentation ip nhrp...
View ArticleUCS LDAP Configuration
Folks,I have a question re: LDAP for UCS. Does anyone know, if in the lab we get tasked to do an LDAP config, whether we will be told the BaseDN is a CN= or an OU= ?This is quite important...
View ArticleOSPF LSA4/5/7 and Forward Address
Hello,I have some doubts when thinking about LSA4/LSA5/LSA7 and Forward Address concept.I know that in case of LSA5 the FA is set only in certain circumstances, but in case of LSA7 it is...
View ArticleBuilding INE's RSv5 topology on IOS on GNS3
Use this thread for discussion on building INE's CCIE RSv5 topology using GNS3 with 7200 series routers.Details of INE's RSv5 topology can be found here.Details on GNS3 can be found here.This thread is...
View ArticleDMVPN with EIGRP
Hi I would like to ask you if someone has had flapping connections once DMVPN and EIGRP are running? Im using cisco routers 1841/3825 with IOS 15.0Thank you R1#*Jun 6 19:03:20.847: %DUAL-5-NBRCHANGE:...
View ArticleEigrp PE-CE problem
I am recreating task 4.4 MPLS L3VPN with EIGRP as the PE-CE protocol on both sides, for some reason the vpnv4 routes do not want to be redistrbuted to eigrp. I am getting this problem on both sides ,...
View ArticleOSPF for DMVPN;
Hi All, I was reading the design guide for DMVPN and see this config •Headend router:!interface Tunnel0description dmvpn tunnip address 10.173.20.1 255.255.255.0no ip redirectsip mtu 1400ip nhrp...
View Article