Automatic reply: RE: CCIE RSv5 Equipment Build
I will be out of the office beginning 4/21/2014 returning on 4/22/2014.
View ArticleCCIE ATC Sec videos about attacks
I'm currently watching some of the ATC 3.5 Sec videos. Brian has mentioned a few times "I'll show you more about the different attacks in a later video". Or "I'll show more about this topics in the...
View ArticleWhat console servers do you use?
I am in the market for a big console server.I use a Cisco 2511 very happily in my rack, but I need to connect to about 40 devices.Does anyone know what INE use in their racks as I am looking for a good...
View Articlehow to check the open ports on ASA and switches
Hi !,how to check the open ports on ASA as well as in switches like we do on routers [ show control-plane host open-ports ] Thanks
View ArticleAutomatic reply: What console servers do you use?
I will be out of the office beginning 4/21/2014 returning on 4/22/2014.
View ArticleProblems with Graded Troubleshooting Labs?
Has anyone had any problems with the Graded Labs today?I booked up all 3 troubleshooting labs and not one of them graded, it just hangs on the score report and never completes.I have logged a ticket...
View Articlet37 fax onramp/offramp
Hi all. first of all, I don't have any knowledge of voice, because I'm an RS guy. but I'm in the process of configuring the T.37 onramp/offramp and need some help. my config is works in onramp portion....
View ArticleHOW TO CONFIGURE SIP DELAYED OFFER?
Is there any command to force a Cisco SIP Voice Gateway (VG) router to use Delayed Offer. I am using IOS Version of 12.4(22)T on Cisco 2811 Hardware. The basic requirement is that to demonstrate that...
View Article2.2 Summarized routes back to RIP on BB3
Hello community,In this task, R4 learns 30.0.0.0/16 through 30.3.0.0/16 and 31.0.0.0/16 through 31.3.0.0/16 via RIP from BB3 and summarizes these into 30.0.0.0/14 and 31.0.0.0/14 into OSPF. Later in...
View ArticleDual-home site PE-CE routing
Hi Consider a dual-homed site, CE1----PE1---PE2---CE2 with the CE's connected via backdoor link and with RIP as the PE_CE routing protocol. Routes are advertised from PE to CE1 via redistribution....
View ArticleInterAS L3VPN- Back to Back VRF with OSPF
Hello experts,I am trying to configure InterAS L3VPN with Back to back VRF using ospf as the protocol between the 2 AS'es. Topology is very simple. Have an issue, plz let me knw if someone has seen it...
View ArticleASA QOS shape average limit
My understanding of the shape average <rate> command is to set the bucket that traffic resides in and is shaped out of. I've read that this should match the CIR that the ISP provides me, but the...
View ArticleCCIE Security v4 Practice Labs Workbook now released
Folks, While studying today my study partner noticed that within the last 10 minutes, INE has released the new CCIE Security v4 Practice Labs workbook.We also now have new IEOC forum sections for the...
View ArticleRack Rental tokens for sale.
I have taken a new position at work, that focuses me on IT operations and out of the technical field, so I dont have the need for my tokens.I have 1536 tokens left that I will sell all for $600Or I can...
View ArticleTask 3.2 - Prefer R1-R3 link. Offset list unnecessary.
The task states users in v127 should prefer to use the frame relay pvc between R1 - R3 to reach R3s loopback. This kind of implies that we need to offset the metric on the R2-R1 path to make it less...
View ArticleTask 2.3 - rehashed
I was going to shrug this off, but it's bothering me now. For whatever reason, MED wasn't the first thing in my mind to manipulate the 150.1.11.0/24 route out of AS200. Resetting the origin code was....
View ArticleUnidirectional PIM?
Hi,We know that most protocols do verify bidirectional communication on a link when establishing adjacency. My understanding is that PIM doesn't do this, so there could potentially be a situation where...
View ArticleDMVPN per tunnel QOS
Little bit confused about this , when following cisco configuration guide , they do the following...on Spoke , put into nhrp groupon Hub, make Qos policy , and map the nhrp groups to service...
View ArticleVRRP question
I'm trying to get VRRP on dot1q sub-interfaces working. I'm seeing some strange behaviour with both sides being MASTERR1 ->2960 stack port 1/0/1R2 ->2960 stack port 2/0/1 sho run int...
View ArticleFailed on my first attempt... that's not the end... it is the start
Hi everybody here.Last week I failed on my fist attempt for the Lab R&S exam in Brussels. After four years of study and passing the written exam twice (i had to renew it), after my family and me...
View Article