Task 6.2 Alternate solution
So I have circled back to lab 1 to go through 1-10 pre lab & hopefully I am now spotting better ways to do things. What do you good people think to this:Q)To help prevent this type of attack in the...
View Article5.1 multicast testing
Hi everyone,I used 2 other way regarding this task and both seem work.1rst method : R2 (ser 0/0/0):ip pim nbma-mode (even if it's not recommended for dense mode, I was able to ping after that).2nd...
View ArticleEIGRPv6 not available
Hi all, I've got a weird situation or hopefully something simple I'm just not educated on yet. I am following INE's program, workbooks and equipment to study for my lab. I have a Cisco 2610XM with...
View ArticleCCIE home lab setup
So i am just starting my CCIE R&S journey and I am looking for advice on how to setup a home lab. What would be the best way to proceed?
View ArticleMDS9222i Bandwidth Configuration
Hi Folks, just thought I'd share with you some b/w config for MDS9222i port-groups.We know we have 12.8Gbps of b/w available per port-group, and we are also told that when we use all 12Gbps for...
View ArticleIOS versions for routers and switches
Hello,I am trying to implement the CCIE Voice rack rental diagram v3 on GNS3. I am a debutant and I was wondering if the following IOS images for my routers and switches could...
View ArticleWhy is Lab 3 4.1 Updated incorrectly with change in requirements but original...
Hoping someone from INE can help with this. Notice below the original INE scenario from Lab 3 3.1 verses the New via the Web. Notice the answer key is correct for the OLD version. Also the...
View ArticleSupermemo Study Method
I have a question regarding the best study techniques for retaining informationI read through this very informative blog post below about using Supermemo method of reviewing information at a certain...
View ArticleLab 3 Ticket 5
I am missing something on this lab. The solution guide has local-proxy-arp set as follows.R4:interface FastEthernet 0/0ip local-proxy-arpI did not make any modifications on R4 and had reachability. I...
View Article4.16 - "Configure R6 to advertise a default route only to R1 via RIP"
Task states to "Configure R6 to advertise a default route only to R1 via RIP" -- r6 advertises the default route on vlan 146, which includes R4.It seems like this is violating the constraints on the...
View ArticleEncrypted VPLS
if you have a dark fiber connection with 2 attached routers you own connected to a pair of switches on both sides and wanted to extend a number of VLANs using IPsec encryption is VPLS an option? How...
View Articleadvice for "stupid" mistakes
Does anyone have advice on how to: 1) Not misread the question i.e."a phone is plugged into a switchport and will have the COS value marked as 5 this should be preserved"I read this as"A phone is...
View Article7.13 BGP over GRE
I'm sure I'm missing something relatively simple, but for the peering between R2 and R4, why can't we peer (or why can't I get them to peer? over the FR cloud? Using 155.x.0.2 and 155.x.0.4 as the...
View Articletask 4.3 volume II lab 12
i had the idea for this task to activate mpls only on the serial link between R5 and R4. That was interesting because at the end of the task although i was able to see the loopback of VPNA in SW4 i...
View ArticleDocCD: OTV and FHRP?
I found this whitepaper to detail out how to block FHRPs over OTV: http://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-switches/white_paper_c11-644634.html#_Toc288015924, which...
View Article3rd strike, I am out
So I sat on the exam few days ago for 3rd time and failed again. This time I failed both the TS and the configuration, the latter by a huge margin. Let me start with the TS - after one hour and 20...
View ArticleJoining ieoc.com Group Study
Greetings ieoc.com Group Study, I believe yesterday 3/28 I joined ieoc.com Group Study. I saw my name appear in the list at ieoc.com like this... dougkenline joined IEOC - INE's Online Community....
View Articledoccd in the lab exam
are we allowed to use "ctrl+f" in the doccd during the exam? or will we have to scroll through entire material to find topic we are looking for? does doccd in the lab exam look similar to what is...
View ArticleTask 2.6 - Alternative solution?
Hello,Is this possible to use Distance to filter route from R3 in this topology. I tried but unsuccess :(I have unpredictable result when doing this way. Rack1R5#sh run | s i router osrouter ospf 1...
View ArticleNotes From Failure #1 or "My $1500 Water Bottle"
On November 25th, I made my first attempt of the CCIE and failed it. I've always found insight from reading other people's lab attempt stories so I wanted to share my notes. I've always enjoyed...
View Article