Rack Rental - CM issue
I'm in the middle of a lab and for some reason the phones (I'm using the diagram from Voice Rack Rental) at the Corp site shows "unknown" both at the registration and IP level. I had this same problem...
View Article3.4 Floating Static Routes
HiAm just curious about the solution provided to this question. I can understand why one would configure an Admin Distance of 20 after the "less preferred" route in order to ensure that the preferred...
View ArticleAuto RP filters
I can't figure out why when using auto rp if I add rp announce filters with group filters on the rps the solution works. If I remove the group filters from the RPs with the announce filters the...
View ArticleEnhanced VPC with oprhaned ports
HI I would like to understand with enhanced vpc does this stop the oprhaned ports issue AS the FEx are dual homed to the a pair of 5k in the old fex design where it it was only connected to the one...
View Articlemsdp multicast
do we use msdp to peer RPs that are in different AS or do we use it for RPs that are in same as well?
View ArticleFRTS question
I am little confused on when and how to use the "frame-relay traffic-shaping" command. I is my understanding that it should be used when you want to enable legacy FRTS only like the config below. It...
View ArticleTask 7.14 Next Hop (Route-Map) on R3 ..?
Dears,I have seen that we point Next-Hop to R1 in Router#3.If we do not do it , packet go to SW1 and dont reach.In normal cases/previous Tasks we always do next-hop self on Border Routers and in...
View Article5.26 EIGRP Filtering with Route Maps
[omitted]* Configure a route-map filter on R3 that denies EIGRP routes with a metric in the range of 500,000 - 750,000 from entering the routing table.* These filters should no impact any other...
View ArticleNexus 7K Design utilizing F2 modules
We are currently looking at the Nexus line for a data center migration project, hence looking a the overall design, and as we all know the Nexus line isn't a cheap purchase. Anyway, I'm reviewing the...
View ArticleBGP Route-Map Logic
Hi,Just wanted to share a drawing I made explaining BGP Route-Map Logic:http://ds.piecesofart.net/ieoc.com/BGP%20Route-Map%20Logic.pngI would love to hear your comments / suggestions.Thanks!
View ArticlevPC Peer-Switch with KeepAlive on dedicated SVI
Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes;...
View Article7.13 BGP over GRE
I'm sure I'm missing something relatively simple, but for the peering between R2 and R4, why can't we peer (or why can't I get them to peer? over the FR cloud? Using 155.x.0.2 and 155.x.0.4 as the...
View ArticleCisco IOS XRv appliance in GNS soon
Looks like IOS-XR would be available in a VM format soon, according to GNS:http://www.gns3.net/topics/news/Cisco's VIRL till hit the final version(s) (personal/enterprise) will need some time as it...
View ArticleIssues Boot from SAN
Hi all, This is my first post so please excuse any incorrect forum etiquette on my part. I have been working through the labs over the last few months and have found them to be extremely good. I am...
View ArticleClik here to view.
Problems with DC Rack7 Storage
Hi, I'm working on rack 7, but it looks like no LUNs are being presented from the storage array to my Emulex adapters pwwn. Has anyone else experienced this?My flogi's, fcns, etc is all fine. I even...
View Article8.29 Multicast BGP Extension
Any body have a good posting on this? I did a search for somthign that would explane the basics and it came up empty. I think I need to understand the theory better on this before i start asking...
View ArticleHelp for Cisco 2960 48port switch not working
I had downloaded the template from the wiki for Cisco 48 port switch,unfortunately, it seems doesn't work.Are there other places where i can find WS-C2960S-48TS-L switch ? I also search the internet to...
View ArticleCCIE itch. Need CCIE training order advice
Not sure why but for some strange reason I want to torture myself and family for the next foreseeable future. I passed my CCIE Security in September 2012 thanks to INE. I need to renew and want to use...
View Article