Passed CCIE SP Lab. Now Dual CCIE#35565
Hello IEOC, I have passed the CCIE SP Lab yesterday at Brussels. The results came in pretty fast aroung 10 PM. I will share my experience here. I will only share thinggs pertinating to the SP lab....
View ArticlePost pending moderation
Why do i get Post Pending moderation error frequently?Will my post gets deleted after this?
View Articlemds books to refer to
Hi all, while cisco doc provides different pdf/document for MDS NX-OS 5.2 . Which one should we really care ? Cisco MDS NX-OS Release 5.2 Configuration LimitsCisco MDS 9000 Family Data Mobility...
View ArticleTask 1.1 vtp pruning
Hi All,Above task 'Manually configure your network to behave as though vtp pruning has been enabled'. I came across a task like this in an earlier lab and was slightly confused by the answer and...
View ArticleFull Scale lab 3 Multicast 6.1
Hi Guys,I am not sure if I am missing something here or not.any assistance appreciated .XR2 cannot see RP (10.0.0.1 on R1) through BSR and the output is empty on XR2 ??R8 can see RP via the GRE Tunnel...
View ArticleCCIE RnS Written V4 and Lab V5 compatibilty
Hi All,Has anyone been able to establish whether a valid CCIE RnS Written exam (350-001) is compatible with the new CCIE Lab Version 5 (following on from 4th June 2014). This is obviously assuming that...
View ArticleCCIEv5 topology
Hey guys - any ides when you will list/show the new INE topolgy for the v5?Reason for asking is i see most are going virtual for this and i might go the same way if Virl can run the INE lab.
View Article5.12 and new IOS 15.1 - different behavior
Hi,I have problem with new IOS 15.1.I've seen that there is no possibility to set AD at one command like in 12.4When I entered "ip summary-address eigrp 100 150.1.4.0 255.255.254.0 255"Roter showed...
View Article2.5 Routing Loop Prevention
I have a alternate solution and I'm looking for feedback:2.5 Routing Loop PreventionEnsure that the RIP routes redistributed on R6 are never passed from OSPF and then back into EIGRP on R3 and SW2.Use...
View Article2.6 Default Routing - to go along with my 2.5 solution
So with my solution in 2.5 I can make a alternate solution to 2.6 with the fact that I know that R1 and SW2 can not accept routes that have be redistributed from EIGRP.2.6 Default RoutingConfigure R3...
View Article2.1 EIGRP Load Distribution
In the following task:2.1 EIGRP Load DistributionOne of the deciding factors in choosing EIGRP as an IGP in your network was the ability to do unequal cost load balancing. Therefore, your network...
View ArticleRemoving Flash Card from Operating Router
Hello community,I have an INE lab at home and several times I have removed the flash card from a router that is powered on and then re-inserted it to continue work. At least with my home routers,...
View ArticleIs CCIE R&S worth getting?
I realize this question might not make sense considering the forum but oh well. Every now and then I see articles/posts/random stuff about how the CCIE R&S has lost its luster. Basically the...
View ArticleUSB to serial cables & windows 8
Has anyboy had any expereince with usb to serial on a windows 8 machine?I have not had any luck finding any drivers that work with my current usb to serial cable.
View ArticleType 3 and Type 5 LSA's
Hi everyone,Just want to check whether my thinking is correct on this.A type 5 AS-external LSA originating in area 0 will not enter a stub area 1. A type 3 LSA, however, will be generated into area 1...
View ArticleSession Database already locked, Verify/Commit in Progress.
Hello all, One of our Nexus 5000 (5010) is on vpc with another 5000. They have Fexes configured on them and when I tried to do a configuration in one of the fex port and commit/verify I get the...
View ArticleWhat is allowed to bring and what is provided in Brussels
Hello everyone,I'll be sitting on my 1st attemp to the CCIE Voice just one month ahead from now and I was wondering if anybody has been recently there and can tell me what can you bring into the exam...
View ArticleTask 2.4 IGP redistribution with NSSA area 38
I interpret this question as follows:Change the area 38 into a NSSA area and redistribute as told on R1, R3 and R5. Take into account that you raise the External AD on R1 and R3. R1 router eigrp...
View Articletask 3.10 GRE tunnel down
Hi,I was trying this lab and I am not able to bring tunnel between SW3 and SW4 to Up state.Somehow SW3 and SW4 are not seeing any rip routes when i do sh ip route . Why is this? Is this due to the...
View Article