Hi ,
I have a PE router shown below which has local 9.9.9.9 from direclty attached CE and 11.11.11.11 destined for this CE from BGP as External. I have been seeing variants of change-of process-id , domain-id and possible implementations of sham-link.
In the below situation, do i have any possibility to make these routes 'O' or 'O IA' by any modifications in PE ?
9.9.9.9 -> OSPF DOMAIN ID:0x0005:0x000000010200 OSPF RT:0.0.0.0:2:0
11.11.11.11 -> OSPF DOMAIN ID:0x0005:0x000000010200 OSPF RT:0.0.0.0:5:1
Anyways to change RT here , is the even changable ?
--------------------------------------------------------------------------------------
R4#show bgp vpnv4 unicast all 9.9.9.9
BGP routing table entry for 100:1:9.9.9.9/32, version 11
Paths: (1 available, best #1, table A)
Advertised to update-groups:
2
Local
30.4.9.9 from 0.0.0.0 (4.4.4.4)
Origin incomplete, metric 20, localpref 100, weight 32768, valid, sourced, best
Extended Community: RT:100:1 OSPF DOMAIN ID:0x0005:0x000000010200
OSPF RT:0.0.0.0:2:0 OSPF ROUTER ID:30.4.9.4:0
mpls labels in/out 21/nolabel
R4#show bgp vpnv4 unicast all 11.11.11.11
BGP routing table entry for 100:1:11.11.11.11/32, version 47
Paths: (1 available, best #1, table A)
Not advertised to any peer
2
1.1.1.1 (metric 30) from 2.2.2.2 (2.2.2.2)
Origin IGP, metric 10, localpref 100, valid, internal, best
Extended Community: RT:100:1 OSPF DOMAIN ID:0x0005:0x000000010200
OSPF RT:0.0.0.0:5:1 OSPF ROUTER ID:1.0.0.1:0
Originator: 1.1.1.1, Cluster list: 2.2.2.2
mpls labels in/out nolabel/26
----------------------------------------------------------------
Regards
R